Keurig Won’t Turn On? Try These Quick Solutions

Is your Keurig coffee maker not turning on? The issue could be with the power supply, such as the electrical outlet, power cord, or power button on the machine. This guide gives you simple steps to fix the power issue and make your Keurig work again.

History of Keurig Machines

📜 Keurig coffee makers have been a game-changer in the beverage world, bringing convenience and variety to kitchens and offices alike. With models ranging from the compact MiniKeurig and Slim to the feature-packed K Supreme Plus, Keurig offers options for everyone. However, these appliances are not without their quirks. Whether your Keurig won’t start, won’t power on, or shows the infamous “Keurig descale light” even after descaling, you’re not alone in facing these issues.

The Rise of Keurig

🚀 The brand has gained a lot of attention by offering many kinds of drinks. Whether you’re an espresso aficionado, a fan of French press coffee, or a green tea enthusiast, Keurig has a product to suit your taste.

Common Troubles and Fixes

🛠️ If your Keurig shuts down or your K-cup won’t work, it’s common to look online for help. Common questions include how to descale your machine, often using baking soda solutions or other products designed for this purpose.

Community and Customer Experience

💬 Keurig has built a robust online presence, often sharing recipes and how-to guides on their official Instagram account. This guide uses valuable tips from Keurig users to offer effective solutions for common problems.

Environmental and Health Concerns

⚠️ The water you use can add contaminants to your coffee. Some families use water softeners to fix this. It’s essential to weigh the benefits and costs, especially when considering the chemicals used in descaling products.

Keurig Coffee Maker Common Problems

There are a number of common problems that Keurig coffee makers can develop. These include:

Common Problems	Possible Causes	Suggested Solutions
🚫 Coffee tastes bad	Mineral buildup, old coffee grounds, or a dirty machine.	Descaling your machine and using fresh coffee grounds can help resolve this problem.
⚡ Keurig not turning on	Faulty power outlet or a malfunctioning machine.	Try plugging the machine into a different outlet, or check the power cord for damage.
☕ Dispenses too much or too little coffee	Clogged needle or dispensing line.	Try cleaning these components, or adjust the brew temperature or K-Cup size.
💧 Coffee maker is leaking	Broken seal, cracked water reservoir, or clogged water line.	Check the machine for visible damage, and try cleaning the water line with a paper clip.
🔊 Coffee maker making strange noises	Clogged water line, dirty machine, or malfunctioning motor.	Try cleaning the machine and water line, and contact Keurig customer support if the problem persists.

Causes of Problems

There are several possible causes of problems with your Keurig coffee maker. Some of the most common causes include:

🛑 Mineral Buildup

Over time, minerals can accumulate in the machine, affecting its performance. Descaling your machine regularly can help prevent this problem.

🍂 Old Coffee Grounds

If you use old or stale coffee grounds, your coffee may taste bad. Using fresh coffee grounds can help improve the taste of your coffee.

🚧 Clogged Components

If the needle or dispensing line is clogged, it can affect the amount of coffee dispensed. Regular cleaning can help prevent this problem.

🛠️ Broken or Damaged Parts

If there is visible damage to the machine, such as a broken seal or cracked water reservoir, this can cause problems with the machine.

How to Fix a Keurig Coffee Maker

One single solution to multiple Keurig problems is the Keurig Coffee Maker Reset option. Reset your Keurig and see whether your issue has already been resolved or not.

🔄 Types of Keurig Reset

There are two levels of Keurig reset:

• Basic Keurig Reset
• Advanced Keurig Reset

How To Reset a Keurig

Although Keurig coffee machines are easy to use, they don’t have a reset button. We are going to show you two ways in which you can reset your Keurig basic and advanced.

🔄 Basic Keurig Reset:

Resetting a Keurig is fairly basic. Here is what you have to do:

• Step 1: Turn your Keurig off.
• Step 2: Keep the device unplugged for a few hours.
• Step 3: Detach the water reservoir from the device.
• Step 4: Leave the unplugged brewer without the water reservoir for a few minutes.
• Step 5: Turn the power of the device on and then replace the water reservoir.

Your Keurig reset is complete.

However, if this does not prove helpful or you are using Keurig 2.0, an advanced reset is what you need. Here is how you can reset your Keurig 2.0:

🔄 Advanced Reset:

• Step 1: You see the “Small” and “Medium” cups buttons. Press these two at the same time.
• Step 2: Now release these two buttons at the same time.
• Step 3: Without delay, press the “Menu” button 3 times.
• Step 4: If you have done it right, you will see the clock display “6:09”.
• Step 5: You see it? Okay, now press the “Menu” again.
• Step 6: At this point, your display should show “Brew 0:00”.
• Step 7: Press the “Medium Mug” button.
• Step 8: While keeping one finger pressed on the “Medium Mug” button, press and release “Menu”.
• Step 9: With the “Medium Mug” button still pressed, press the “Small Mug” button.
• Step 10: Unplug and plug in the machine several times.

Now plug in for the last time. The advanced reset is complete.

Keurig Coffee Machine Troubleshooting

Specific Keurig troubles need specific troubleshooting techniques. Here are some common issues, one of which you may be facing right now. We have troubleshooting tips for them. 

Keurig is not working:

A Keurig machine may stop working for various reasons. 😞 Some specific issues include:

• Keurig won’t turn on 🚫
• Keurig turns on and shuts off on its own 🔛🔴
• Keurig says “descale” and doesn’t brew ☕
• Keurig stops in the middle of brewing ❌

---

Keurig Won’t Turn On:

If pressing the power button on a plugged-in Keurig machine doesn’t display a power icon or welcome note, follow these steps:

Step 1: Unplug the coffee maker 🔌
Step 2: Plug the coffee maker back in 🔌
Step 3: Press the power button again 🔄

Machine working now? Excellent! 😊
If not, go to Step 4.

Step 4: Switch to a different power outlet and try again 🔌🔄

Still not working? Go to Step 5.

Step 5: Reset the Keurig machine 🔄

Machine working now? Excellent! 😊
If not, it’s time to contact Customer Care. 📞

---

Keurig Turns On and Shuts off on Its Own 🤔

If your Keurig starts to turn on and off on its own, don’t get scared. Chances are the auto-timer feature is at work. Here is what you can do depending on which Keurig model you are using:

Keurig Mini 🟢

This device has a built-in feature of turning itself off after 90 seconds of inactivity. There is nothing wrong with the device. You need to power it on every time you use it.

Keurig Elite 🟣

If the “Auto off” feature is turned on, your Keurig Elite will turn off after 2 hours of its last brew. This feature is on if the green “Auto off” light glows.

• Quick Fix: Press the black “Auto-off” button to disable it. The green light will go off, and your Keurig will stop shutting itself down.

Keurig Special Edition and Keurig Platinum 🟠

To disable the “Auto-off” feature:

• Step 1: Press the menu button twice.
• Step 2: Press the “Small Cup” button on the left several times until it says “Off.”

Your device won’t shut itself down again.

Still Experiencing Issues? 😕

If these solutions don’t work and your Keurig is still acting independently, it’s time to call Customer Care.

---

Keurig Won’t Brew ☕❌

One common reason why your Keurig may seize to brew is debris such as dried coffee grounds or calcium building inside the waterline or pump. Tap water contains a variety of minerals, and that’s what causes this trouble.

Quick Fix 🛠️

Step 1: Cleaning Up the Dispensing Line 🧹

• Unplug your Keurig.
• Blow air into the dispensing line using a straw. This cleans up the dispensing line.

Step 2: Run the Machine Without the K-cup 🔄

• Run the machine with water a good several times without the K-cup.

Your machine should start brewing now. However, a long-term solution is to descale your Keurig on a regular basis.

---

Keurig Stopped in the Middle of a Brew 😱🛑

Sometimes, the magnet of the water reservoir may get dislodged in the middle of the action. This will cause your Keurig to break down midway.

Quick Solution 🛠️

• Reset the Reservoir’s Magnet: Set the reservoir’s magnet in its correct position.
• Result: Brewing will resume. 🎉

---

Keurig Says Descale But Won’t Brew 🚫☕

If your Keurig says descale, you have got to descale. And if it doesn’t give you such a notice but refuses to brew, even then, descaling is wise.

Preliminary Step: Clean the Dispensing Line 🌬️

Step 1: Blow air into the dispensing line using a straw in order to clean it.

Main Steps: Descaling a Keurig Coffee Maker 🧼

Step 2: Follow these steps to descale your Keurig Coffee Maker:

1. Switch Off and Unplug: Turn off the machine, unplug it, and remove the water reservoir.
2. Pour Descaling Solution: Pour Keurig Descaling Solution into the reservoir.
3. Add Water: Fill the empty bottle of the descaling solution with water and pour this into the reservoir.
4. Power On and Place Mug: Turn on the Keurig and place a mug below the dispenser.
5. Cleansing Brew: Carry out a cleansing brew using a 10 oz brew size.
6. Discard Contents: Empty the mug into the sink.
7. Repeat: Continue this cycle until the “Add Water” sign appears.
8. Rest Time: Let your brewer rest for 30 minutes with the power on.
9. Rinse Reservoir: Thoroughly rinse the water reservoir.
10. Final Cleansing Brews: Fill the reservoir with fresh water and carry out 12 cleansing brew cycles.

Recommended Products for Descaling 🛒

• Keurig Descaling Solution: Ideally used for this process. Also, the manufacturer offers bundle maintenance packs that contain this solution.
• Universal Descaling Solutions: You can also use Coffee Machine Descaler by Impressa or Coffee Machine Descaling Solution by Tupkee.

Result 🎉

Now you have successfully descaled your Keurig Coffee Machine, and it should be up and running.

---

Keurig Says ‘Add Water’ but It’s Full 💦❗

If your Keurig reads “Add water” even when the water reservoir is full, the solution lies in cleaning the reservoir.

How to Clean the Reservoir and Fix the Issue 🧼🛠️

Here is how to do it:

Step 1: Hand Wash Reservoir
Hand wash it with mild soap and a soft cloth.
📝 Note: The reservoir is not dishwasher-proof, so you have to hand wash it. Use mild dishwashing soap such as Palmolive Ultra Mild Dishwashing Liquid.

Step 2: Rinse
Rinse the reservoir thoroughly.

Step 3: Clean the Valves
Clean the valves at the bottom of the tank and on the machine where the tank goes.

Step 4: Fill the Tank
Fill the tank to the maximum level with any type of water, except softened water.

Step 5: Reattach the Tank
Secure the tank back onto the Keurig machine.

Step 6: Clean Exit Needles
Clean both the exit needles.
📝 Note: Be careful; exit needles are sharp. In this step, a Keurig Needle Cleaning Tool comes in handy.

---

Keurig Leaking Water When Heating 🚰💧

If your Keurig is leaking water during preheating, it is likely that the device is clogged. There are two things you can try out:

Quick Solution 1: Clean and Check 🧼🔍

Step 1: Clean Both Exit Needles
Clean both the exit needles using the Keurig Needle Cleaning Tool.

Step 2: Clean the K-cup Holder
Now clean the K-cup holder thoroughly.

Step 3: Check the Valve
Inspect the valve at the bottom of the water tank to see if it’s clogged.

Quick Solution 2: Shake it Up! 🔄👋

Yes, a good shake may solve your problem. Here’s how:

Step 1: Turn Off and Remove the Reservoir
Switch off the Keurig and take off the water reservoir.

Step 2: Shake the Device
Turn your Keurig upside down and give it a gentle up-and-down shake.

Step 3: Tap the Bottom
Also, tap the bottom several times to ensure any clogs are removed.

Step 4: Reassemble
Now, put everything back in its place and test the machine.

---

Keurig is Not Hot Enough: 🔥❌

The water pump may have an answer to why your Keurig is not heating properly.

Even then, before investigating, make sure that you are allowing sufficient warm-up time.

If you are, then these are the possible issues that your Keurig is facing:

• The water pump is not working to its maximum efficiency
• The water pump is out of order or malfunctioning, so the heating device shuts off due to overheating or over-pumping issues.
• Your machine is clogged.

Quick Fix: 🛠️

Press the brew button for a few seconds. Your water pump should notch up in terms of efficiency.

If this does not get rid of the trouble, then your water pump needs to be repaired or replaced. Keurig Main Pump fits a wide variety of Keurig models. You can also give your Keurig a thorough clean in case the issue is due to a clogged up machine.

---

Keurig Coffee Tastes Odd: ☕❓

You have not changed your coffee brand and have done nothing new. The coffee that your Keurig brews for you is supposed to retain its taste. Instead of delivering that consistency, your Keurig is brewing odd-tasting coffee. 🤔

Believe me, when I say this, it is not a specific Keurig issue. It can happen to any coffee machine when a significant proportion of minerals accumulate inside it. These minerals come from the tap water that you use to fill the water reservoir. 🚰

Quick Fix: 🛠️

Use Keurig Rinse Pods once a week or after brewing a flavored drink.

Long Term Solution: 📅

Descale Your Keurig. Follow the steps explained in our section ‘Keurig Says Descale But Won’t Brew‘.

It is a great practice to descale your Keurig every 3 months using Keurig 3-Month Brewer Maintenance Kit. You won’t experience an odd-tasting coffee anymore after this. 🎉

A Keurig 6-Month Coffee Maker Maintenance Bundle is also available which will take care of your Keurig Coffee Machine half the year and you won’t need to worry about purchasing maintenance supplies every few days. 📦

---

📌 Keurig is Not Dispensing Enough Water

If you are not getting the brew size you selected and your cup remains half empty, you are looking at a clogged needle problem here. A coffee maker needle gets clogged by coffee grounds and cocoa mix.

🛠 Troubleshoot Using These Steps

Step 1: Remove and re-insert the water reservoir to ensure it is placed in the correct alignment.

Step 2: Carry out a cycle of water-only brew. If you choose a 6 oz size brew, keep a measuring cup and see whether your Keurig has correctly dispensed 6 oz water.

If it has, then your troubleshooting is successful.

If it has not, then proceed to Step 3.➡️

Step 3:

1. If you are not using a water filter, jump to Step 4.➡️
   But before you do that, using a water filter for your Keurig Coffee Machine is highly recommended. A Keurig Water Filter Starter Kit is what you need.
2. If you have a water filter at work, remove it and run a cycle of water-only brew without a pod. Again, measure the brew amount using a measuring cup.
   If it has brewed the correct amount this time, then replace the charcoal filter with a 12 Pack Keurig Charcoal Water Filters Replacements Pack, and put the water filter back into the device. Your device should be running smoothly now.
3. If it hasn’t brewed the correct amount, then there is nothing wrong with your water filter. Proceed to Step 5.➡️

Step 5: Clean the entry and exit needles. Make sure to be cautious during this step. Needles are sharp, and you would not fancy pricking yourself. May I remind you that a Keurig Needle Cleaning Tool kit really comes in handy?

Step 6: Again, carry out a few cycles of water-only brew without pod choosing the 6 oz and 8 oz sizes. Use a measuring cup to check whether your device is dispensing the correct amount of water this time.

Step 7:

1. If your device is still not dispensing enough water, then it is time to call Customer Care.
2. If your device has started brewing the right amount of water, go on and brew a pod. You won’t be disappointed with half a cup.

---

📌 Keurig 2.0 Touch Screen is Not Working

If your Keurig 2.0 display is blank, try unplugging the brewer and plugging it back on. See if the issue is resolved. If your Keurig 2.0 touch screen is still cold towards you, get ready for some troubleshooting.

🛠 Troubleshooting Steps

Step 1: Plug in your Keurig 2.0. The power icon should be at the bottom left of the display.

1. If nothing shows, follow our section ‘My Keurig Won’t Turn On‘.
2. If you can see the Power button, turn it on and proceed to Step 2.

Step 2: Go to “Menu” and proceed to set the clock.

Step 3: Navigate yourself through the “Menu” and try to set all the menu options.

Step 4: When you reach the “Lift to Begin” screen, lift the handle then lower it down.

Step 5: If the brewer shows signs of beginning to start a brew, your troubleshooting is successful.

---

📌 Keurig 2.0 is Not Working After a Power Outage

When a Keurig becomes non-responsive after a power outage, most probably a sudden surge of voltage when the power came back has damaged your Keurig. It is better to call Customer Care regarding this issue. Even then, you can try these measures to try to bring your Keurig 2.0 back to life. Here is what you can do:

🛠 Troubleshooting Steps

Quick Fix Step 1: Unplug the cord, wait and then plug it back on to see if it works (You wish to keep your fingers crossed while doing this).

Quick Fix Step 2: If you still cannot see the Power Button, follow the steps on our section ‘My Keurig Won’t Turn On‘.

If this doesn’t work then call Customer Care.

📌 Keurig Rivo Makes a Humming Noise When It’s Off

Your Keurig has started making a humming noise and won’t stop no matter what you do?

You have unplugged and plugged in your Keurig but the humming persists. As I already mentioned this is something that scared me the most and I found the answer is in its sensor.

🛠 Quick Fix

Quick Fix: With a wet washcloth, wipe the inside and surroundings of the sensor thoroughly.

Your Keurig should go quiet.

---

📌 Keurig Won’t Close

If your Keurig lid is stuck and won’t close, try this quick fix.

🛠 Quick Fix

Quick Fix: Locate a little ring just underneath the brewing chamber head. Fiddle with it a bit and try closing your Keurig again. This should solve your trouble.

---

🌿 The Environmental Impact of Keurig Machines

Keurig machines have made our mornings easier and our kitchens more efficient. But have you ever stopped to think about the environmental impact of these convenient appliances? With each cup brewed, questions arise concerning the sustainability and eco-friendliness of Keurig machines.

🗑 Waste and Contaminants

• Single-Use K-Cups: One major concern is the waste caused by single-use K-cups. These cups often go to landfills, adding to the waste problem.
• Water Quality: The type of water you use in your Keurig can introduce contaminants, affecting both your health and the environment.
  • Solution: Some families opt for water softeners to address this issue.

🔌 Energy and Resources

• Energy Usage: Keurig machines use energy. This raises your bills and harms the planet over time.
• Comparison: Other home appliances like dishwashers and ovens also use energy, so adding a Keurig makes the issue worse.

🌱 Sustainable Choices

• Responsibly Sourced Coffee: The brand also uses responsibly sourced coffee beans in some products.
• Adequacy: But the question remains: Are these changes enough to lower the environmental impact?

📣 Public Attention

• Consumer Feedback: Feedback shows that people care more about the environmental impact of what they buy.
• Reviews: From Amazon reviews to comments on their site, buyers want greener options.

🌍 Future Outlook

• Ongoing Efforts: The effort to make Keurig machines greener is ongoing.
• Consumer Influence: As customers, your voice matters. By asking questions and seeking eco-friendly options, you help shape Keurig’s future products and their impact on the planet.

☕ How Keurig Changed the Coffee Culture

Keurig machines have revolutionized the way we enjoy our beverages. Here’s how:

⏱ Revolutionizing Convenience

• Ease of Use: Keurig machines make getting coffee quick and easy.
• Comparison: This change in making coffee is like going from washing dishes by hand to using a dishwasher.

🍵 Expanding Beverage Choices

• Variety: Keurig offers a wide range of drinks.
• Preferences: Whether you like classic black tea or new blends, Keurig offers drinks for all tastes.

🎨 Encouraging Customization

• Personalization: Keurig lets you make your coffee your way.
• Creativity: This choice lets people make unique Keurig recipes. They mix K-cups and add things like sugar and oil.

🗨 Influencing Social Interactions

• Social Hub: Keurigs are popular in offices and social events.
• Community: At parties, people often gather around the Keurig. They talk about drinks and share recipes.

🌿 Raising Ethical Questions

• Environmental Impact: Keurig’s impact is not just about convenience.
• Awareness: Some people are thinking twice about buying Keurigs because of studies on single-use plastics.

🌎 The Future of Coffee Culture

• Ongoing Change: Keurig has changed how we enjoy drinks.
• Adaptation: But as we learn more about health and the planet, the brand needs to adapt.

🛠 DIY Fixes for Your Keurig Machine

Here are some DIY fixes you can try if you’re having issues with your Keurig machine:

🧼 Cleaning the Coffee Maker

• Problem: One common issue with Keurig machines is mold and mineral buildup.
• Solution: Create a mixture of water and white vinegar to descale your machine. Follow the manufacturer’s instructions for a thorough cleaning.

🚰 Unclogging the Machine

• Problem: Coffee grounds and tea leaves can clog the water lines.
• Solution: Run hot water through the Keurig’s brewing cycle several times. If that doesn’t work, consider disassembling the parts in contact with water for a good scrub.

🔄 Resetting Your Keurig

• Problem: Keurig won’t turn on.
• Solution: A hard reset might be the solution. Unplug the machine, wait for about 30 seconds, and plug it back in. Follow the instructions on your Keurig’s display afterward.

🛠 Installing Replacement Parts

• Problem: Specific faulty parts like a magnesium heating element or a broken dryer component.
• Solution: Order these parts online if you’re comfortable with DIY tasks. Keep your order history as proof of purchase for warranty claims.

🔒 Privacy Settings and Preferences

• Problem: Software glitches on smart Keurig machines.
• Solution: Check your privacy settings. Resetting these settings to default can often fix the issue.

🍵 Additional Tips and Recipes

• Idea: Don’t limit your Keurig to just coffee or tea.
• Recommendation: Many online recipes guide you in making hot chocolate, iced drinks, and even soups. Share your go-to recipe as a unique gift idea.

📝 Note to Readers

While DIY fixes can solve many issues, some problems may need professional repair. Consult the manufacturer if your machine is under warranty before trying any DIY fixes to avoid voiding your coverage.

---

🎉 Now That You Have Busted the Ghost in Your Keurig

The tips and tricks to get around Keurig troubles generally apply to most of the Keurig Coffee Machines. Whether you have a Keurig Mini, Keurig 2.0, Mr. Coffee Keurig, or Keurig Rivo, these are some of the handiest Keurig troubleshooting tips and generally apply to any Keurig Coffee Maker.

You have most probably busted the spooky Keurig trouble by now, but if you could not, then the problem with your device is more complicated. It is a great idea to call Customer Care and let the manufacturer have a look. They are just a call away.

📞 Contact Information

Dial the toll-free number 1-866-901-BREW (2739) to reach Keurig Support.

🎉 Now What?

Enjoy your coffee. And while you are at it, think of the good number of K-cups you are going to need now that you have a functioning Keurig at your service.

🎁 Bonus Just For You

Don’t worry; here is a bonus just for you — Some of the best K-cups coffee makers!

Have a happy coffee day! ☕

---

FAQs